Intermec 6400 User Guide

The access point can be configured with an IP address,

subnet mask, and IP router address.  It can also be

configured to automatically obtain IP addresses through

DHCP or Bootp.  The default setting for all IP addresses is

0.0.0.0.
If the access point's IP address is 0.0.0.0 and its DHCP

client is enabled, the access point retrieves IP addresses

and the lease expiration time from a DHCP or Bootp server.

" NOTE:

The access point LAN ID is a number that logically isolates

adjacent but independent open wireless LAN networks.

You should change the default of 0 to another number to

avoid a potential conflict with an adjacent network.  The

LAN ID for all access points and 6400 computers in the

same network must match.

" NOTE:

The channel sets the radio hopping sequence.  The

subchannel enables access points to share the same channel

without receiving another access point's frames.  To

maximize the available bandwidth, the channel and

subchannel should be unique for each closely located access

point.  The default setting for the channel and subchannel

is 1.