Intermec cv60 Reference Guide
2
CV60 SDRAM Upgrade Instructions
Procedure
1
Place the CV60 Computer face down on a cushioned anti-
static mat.
static mat.
2
Using a Philips screwdriver, remove the eight screws securing
the CV60 rear bracket, then remove the rear bracket.
the CV60 rear bracket, then remove the rear bracket.
3
Touch something metallic to dissipate any ESD (Electric Static
Discharge) from you.
Discharge) from you.
4
Remove the SDRAM module from its static bag.
5
Make sure that the notches on the memory modules are
aligned with the keys of the CV60 memory socket.
aligned with the keys of the CV60 memory socket.
6
If replacing or upgrading an existing memory module, remove
the memory module by spreading the module clips and gently
lifting the edge of the module to a 45-degree angle and then
pulling the module out of the slot.
the memory module by spreading the module clips and gently
lifting the edge of the module to a 45-degree angle and then
pulling the module out of the slot.
7
Insert the SDRAM module into the connector, align it, and
gently lower it and snap into place.
gently lower it and snap into place.
8
Replace the rear bracket and eight (8) Philips screws.
Hardware List - SDRAM Upgrade
Part Number
Quantity
Description
203-806-001
1
256MB RAM Option
Key
Clip
Clip