Intermec 5020 User Guide
Chapter 2 — Developing and Testing Your Application
Data Collection Browser User’s Guide
33
2
In the Address line or the Go to line:
• If you are browsing from the same computer that hosts the Intermec
Gateway, type
http://127.0.0.1:4050
and press Enter.
• If you are not browsing from the same computer that hosts the
Intermec Gateway, type
http://gateway-IP-address:4050
where
gateway-IP-address is the IP address of the Intermec Gateway.
Press Enter. The dcBrowser Device Mapping Configuration screen
appears.
appears.
3
In the table below the configuration screen, click 0. The Device 0
information appears in the configuration screen fields.
information appears in the configuration screen fields.
4
In the Host IP:Port field, enter the IP address and port of the web
server. If the web server is on the same PC as the simulator, type:
server. If the web server is on the same PC as the simulator, type:
127.0.0.1:80
5
In the Home Page field, enter the name of the web page that the web
server sends to the device when the device is turned on.
server sends to the device when the device is turned on.
6
Enable or disable the Links, Post Device ID, and Lowercase
parameters. For help, see the online help for the Intermec Application
Server or for the software-only dcBrowser gateway.
parameters. For help, see the online help for the Intermec Application
Server or for the software-only dcBrowser gateway.
7
Click Update. Verify your changes to Device 0 in the table.
8
Click Save. Your changes are saved.
You can also edit a device configuration.
To change a device configuration
1
Click the device ID.
2
Change the configuration fields and runtime parameters.
3
Click Update. If the device ID had an asterisk after it indicating that it
used the Device 0 configuration, the asterisk disappears.
used the Device 0 configuration, the asterisk disappears.
Changing the Local dcBrowser Gateway INI File (Optional)
By changing parameters in the .ini file for the local dcBrowser gateway,
DCB.INI, you can change the following features. For a standard
installation, you can find the .ini file at
DCB.INI, you can change the following features. For a standard
installation, you can find the .ini file at
\INTERMEC\DCBROWSER
\GATEWAY\DCB.INI
. For help changing DCB.INI, see the online help for
the dcBrowser gateway.
What You Can Configure Through DCB.INI
What You Want To Do
Parameter You Change in INI File
Display the anchors with special attributes, such as light characters on a black
background or underlined, or not highlighting anchor tags.
background or underlined, or not highlighting anchor tags.
ANCHOR_HIGHLIGHT
Enable extensive performance data collection.
ciperf