Intermec CV30 Installation Instruction
16
Forklift RFID System Installation Guide
Once you have figured out the best potential locations for the
antennas, you need to mount the antennas on the forklift.
Exactly how you mount the antennas depends on many factors,
including:
antennas, you need to mount the antennas on the forklift.
Exactly how you mount the antennas depends on many factors,
including:
• forklift configuration. Is there space between the spines on the
load backrest for mounting an antenna? Is it okay to remove
one of the spines to accommodate mounting an antenna?
one of the spines to accommodate mounting an antenna?
• customer requirements. Is it okay to drill holes in the sheet
metal, or does the installation have to be easily removed?
• operating requirements. Is there a way to temporarily position
the antennas until you have tested the RFID system? Then,
you can permanently install the antennas.
you can permanently install the antennas.
Mounting On the Forklift Load Backrest
One way to mount antennas for a case tag application involves
mounting the antennas on the forklift load backrest.
mounting the antennas on the forklift load backrest.
Antenna and IV7 Placement for Load Backrest Mounting: Example of the
IV7 and its antennas mounted directly to the forklift load backrest.
IV7 and its antennas mounted directly to the forklift load backrest.
In this example, one antenna is mounted directly to the load
backrest. The antenna must be kept clear of the load on the
pallet. The size and type of load backrest will affect the success of
this kind of installation.
backrest. The antenna must be kept clear of the load on the
pallet. The size and type of load backrest will affect the success of
this kind of installation.
Antenna