Intermec ck1 User Guide
Chapter 5 — Managing the CK1
CK1 Handheld Computer User’s Manual
111
6 When the “Format RAM disk?” prompt appears on the CK1,
press F1. When prompted again to format the disk, press 7.
The CK1 reformats the RAM disk and boots.
The CK1 reformats the RAM disk and boots.
7 If the Terminal ID screen appears on the CK1, press Enter
twice to move through the fields and exit the screen.
You must make sure the terminal ID is correct only if you use
the MCL Link Host application on a PC to communicate
with the CK1. For details, see “Using the MCL System Menu
to Manage the CK1” on page 25.
the MCL Link Host application on a PC to communicate
with the CK1. For details, see “Using the MCL System Menu
to Manage the CK1” on page 25.
8 On your PC, click Exit to close the CK1 Upgrader utility.
The CK1 launches your main application. The CK1 has been
upgraded and is ready for use. If you have any problems, see
“Problems After Loading Firmware” on page 125.
upgraded and is ready for use. If you have any problems, see
“Problems After Loading Firmware” on page 125.
Loading Firmware Manually
You need the following items to load firmware manually:
• CK1 connected to a COM port on a PC
• The image file of the firmware that you downloaded from
www.intermec.com
• The dnw.exe application. You can download this application
from www.samsung.com/Products/Semiconductor/SystemLS
I/MobileSolutions/MobileASSP/MobileComputing/S3C44B
0X/dnw_rev049.zip.
I/MobileSolutions/MobileASSP/MobileComputing/S3C44B
0X/dnw_rev049.zip.
This section explains how to:
1 Connect the dnw.exe application to the CK1.
2 Upgrade the firmware by loading these items:
• Flash writer
• NOR flash
• NAND flash
To connect to the CK1
1 Connect a serial dock to your PC COM port. For help, see
the quick start guide that shipped with the dock.