Intermec ck1 User Guide
Chapter 1 — Learning About the CK1
8
CK1 Handheld Computer User’s Manual
6 Install the battery door.
Determining When the Battery Is Low
The battery is the main power source for the CK1 and it charges
the backup power source, when required. If the main battery
charge goes low, you need to replace it with a charged battery or
charge the battery as soon as possible.
the backup power source, when required. If the main battery
charge goes low, you need to replace it with a charged battery or
charge the battery as soon as possible.
When the battery is very low, the Battery icon changes to
indicate that the battery is very low and the red light flashes
every 5 seconds.
indicate that the battery is very low and the red light flashes
every 5 seconds.
Removing the Battery
Removing the battery while the CK1 is on may cause loss of
data.
data.
To remove the battery
1 Place the CK1 face down on a flat, stable surface.
2 Push back the latch, and pull up on the battery door.
Battery
door
door
Latch
3 Remove the battery door.
4 Lift the bottom of the battery out of the battery
compartment, and pull the battery toward the bottom of the
CK1 and out of the battery compartment.
CK1 and out of the battery compartment.