Intermec ck1 User Guide
Chapter 1 — Learning About the CK1
CK1 Handheld Computer User’s Manual
15
Using the Screen
You can use the CK1 screen to view data, run applications,
monitor the CK1 status, and perform many other functions.
The screen is a backlit liquid crystal display (LCD) that has a
maximum of 16 lines by 20 characters. The screen also supports
double-byte characters and user-programmable fonts.
monitor the CK1 status, and perform many other functions.
The screen is a backlit liquid crystal display (LCD) that has a
maximum of 16 lines by 20 characters. The screen also supports
double-byte characters and user-programmable fonts.
Turning on the Backlight and Adjusting Contrast
To make the screen easier to see, you can turn on the backlight
and adjust the contrast.
and adjust the contrast.
To turn the backlight on and off
• Press Esc and then S2.
You can configure the backlight to always be on. For help, see
“Configuring the Backlight and Screen Brightness” on page 30.
“Configuring the Backlight and Screen Brightness” on page 30.
To adjust the contrast
1 Press Esc and then S3. The Contrast Adjust screen appears.
Adjust
Contrast
MIN
MAX
X
2 Press X or W to set the contrast. Move the slide rule toward
MIN to brighten the screen or toward MAX to darken the
screen.
screen.
3 Press Enter. The new contrast setting is saved.