Intermec ck1 User Guide
Chapter 3 — Developing and Using Applications
CK1 Handheld Computer User’s Manual
51
To configure the CK1 to automatically run an application
1 Load your application on the CK1. For help, see “Loading
Applications and Files on the CK1” on page 47.
2 Transfer .icondata.ini file from /home/data on the CK1 to
the PC. For help, see “Transferring Files From the CK1 to a
PC” on page 118.
PC” on page 118.
3 In a text editor such as Notepad, open the .icondata.ini file
and add
:-l
after the application data.
The following example shows the two lines of text in
.icondata.ini for the MCL demo application with
.icondata.ini for the MCL demo application with
:-l
added
to make the MCL demo application automatically run.
[MCL]
setting=0:1:2:-l,btime,NULL,MCL,
″
/home/MCL
″
,
″
MCL
″
4 To strip the end of line (EOL) character from the
.icondata.ini file, load the .incondata.ini file on the CK1
/home/data using text mode. For help, see “Loading
Applications and Files on the CK1” on page 47.
/home/data using text mode. For help, see “Loading
Applications and Files on the CK1” on page 47.
The next time you turn on the CK1, the application starts.
Using the MCL Demo Application
The CK1 comes with the MCL client and an MCL demo
application installed on it. This application demonstrates how to
use the CK1 to track inventory. This section explains how to
start and use the application.
application installed on it. This application demonstrates how to
use the CK1 to track inventory. This section explains how to
start and use the application.
The CK1 may launch the MCL demo application automatically
when it finishes booting. If not, follow these steps to start the
application.
when it finishes booting. If not, follow these steps to start the
application.
To start the MCL demo application
1 From the top level screen, press W or X to select the MCL
icon and press Enter. After a splash screen appears, the MCL
main menu appears.
main menu appears.