Manualsbrain.com
  1. Manuals
  2. Brands
  3. Intermec
  4. CK32
  5. User Guide

Intermec CK32 User Guide

Download
Page of 149
Chapter 3 — Configuring the CK32 I-Safe
CK32 I-Safe Handheld Computer User’s Manual
51
6
Configure security. For help, see See 
You can configure the network parameters on the CK32 I-Safe to 
using Intermec Settings or ISpyWiFi. For information on 
Intermec Settings, see 
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK32 I-Safe communicates with a 
host computer through the Intermec Application Server. The 
Intermec Application Server translates UDP Plus packets on the 
wireless network into TCP/IP packets on the wired network and 
vice versa. The access point acts as a bridge to allow 
communications between the wired network and the wireless 
network.
To use wireless communications in a UDP Plus network
1
Go to Start > Settings > the System tab > Intermec Settings 
> Communications >UDP Plus.
2
Configure these network parameters on the CK32 I-Safe:
• UDP Plus Activate
• Controller IP address
• Controller Port
3
Make sure the CK32 I-Safe is talking to the network and that 
the network can see the CK32 I-Safe.
4
Configure security. For help, see “Configuring Security on the 
CK32 I-Safe” in the next section.
Checking the Status of Your Wireless Connection
After you configure your wireless settings, you can use iConnect 
to check the status of your connection.
To check the status of your wireless connection
1
Tap the iConnect icon (
) in the lower right corner of the 
Today screen.
2
From the menu, select Status > Wireless. The Wireless Status 
screen appears and checks the connection.