Intermec CK32 User Guide

Tap Additional Settings to assign an inner PEAP 
authentication and set options for server certificate validation 
and trust.

From the Inner PEAP Authentication list, choose EAP/MS-
CHAP-V2, EAT/Token Card, or EAP/MD5-Challenge.

Check Validate Server Certificate to verify the identity of the 
authentication server based on its certificate when using 
PEAP.

Tap Root CA, select a root certificate, and then tap OK.

Enter the Common Names of trusted servers.

Tap OK.

EAP-TLS is a protocol based on the Transport Layer Security 
(TLS) protocol widely used to secure web sites. This protocol 
requires both the user and authentication server to have 
certificates for mutual authentication.

In the Profile Wizard, select the Security page.

For 8021x Security, choose TLS.

For Association, choose Open, WPA, WPA2, or Network 
EAP.

For Encryption, choose TKIP or AES if you selected WPA2 
for association, or WEP or CKIP if you selected Network 
EAP for association.

For Username, type a unique username for this protocol.

Select Prompt for password to have the user enter this 
password each time to access the protocol, or select Use 
following password to use the protocol without entering a 
password each time you use the CK32 I-Safe.

In the Password field, type a unique password for this 
protocol.

Tap Get Certificates to obtain or import server certificates. 
For help with certificates, see