Intermec 6651 User Guide
2-18
Removing a CF Card
1. Close all applications accessing or otherwise utilizing data on the inserted CF
Card.
2. Turn off the device.
3. Press the Eject button so that it pops out of the computer (➀), then push the
button in again (➁) to eject the CF card.
Note:
Push the EJECT button until you hear it click. If you do not, the EJECT button will
be left protruding from the device.
Push the EJECT button until you hear it click. If you do not, the EJECT button will
be left protruding from the device.
Connecting to USB Devices
You can connect to USB (Universal Serial Bus) peripheral devices, such as a
mouse, floppy disk drives, printers, and so on.
mouse, floppy disk drives, printers, and so on.
Note:
•
You can install or remove USB peripheral devices while the device’s power is
turned on.
•
When using USB devices, you must use driver software that is compatible with
the device.
Connecting to USB Devices
1. Open the USB connector
cover.
➁
➀