Intermec 6622 User Guide
SECTION 4
"
Operating the Pen Computer
4-12
PEN*KEY
R
6622 Pen Computer User’s Guide
PC card slot, it does not require an external power supply in order to
retain its internal data.
retain its internal data.
Inserting a PC Card
"
Type I/II cards: These types of cards can be installed in either
the top or bottom slot. Up to two cards can be installed (one in
the top, one in the bottom).
the top or bottom slot. Up to two cards can be installed (one in
the top, one in the bottom).
"
Type III cards: These types of cards can only be installed in the
bottom slot. When one of these cards is installed, the top slot
cannot be used.
bottom slot. When one of these cards is installed, the top slot
cannot be used.
"
NOTE:
The first time that you use a particular PC memory card or ATA card, it
is necessary to format them.
1. Open the PC card slot cover on the right side of the pen comput-
er.
2. Insert the card into the slot, pushing it in as far as it will go.
3. When the card is inserted, the eject button pops out.
3. When the card is inserted, the eject button pops out.
Figure 4-7
Inserting the PC Card
Insert the card with the
manufacturer’s label facing up.