Intermec 6640 Reference Guide
SECTION 4
Toolkit for the Computer
4-28
6640/6650 Windows 2000 Technical Reference
3. After files are transferred to the designated location, the following comple-
tion screen appears with a caution. Click Finish to quit, then click Finish
on the Installation Completed screen (page 4-5) to return to the desktop.
Partition Magic Shrink and Save Diskette
This option creates a bootable DOS diskette, which uses PowerQuest’s Drive
Image Pro and Partition Magic DOS applications to shrink the main partition
and save the shrunken main partition into a PQI file. Additional information
about PQDI is on page 4-25.
"
NOTE:
The Shrink and Save Diskette will not resize the drive automatically back to its full size.
Thus, after running this floppy on a drive there will be very little, if any, freespace remaining.
Use Partition Magic to manually resize the partition larger.
Thus, after running this floppy on a drive there will be very little, if any, freespace remaining.
Use Partition Magic to manually resize the partition larger.
1. Select the default protocol to enter information, then click Next to continue
(page 4-21).
"
If NetBEUI is selected:
Enter the information required for the NetBEUI SYSTEM.INI file,
then click Next to continue (page 4-21).
"
If TCP/IP is selected:
"
NOTE:
Use the DHCP option with extreme caution. If DHCP is used on a network that contains
CISCO DHCP servers, the Microsoft TCP/IP stack can exhaust all available IP addresses.
CISCO DHCP servers, the Microsoft TCP/IP stack can exhaust all available IP addresses.
Enter the information required for the TCP/IP PROTOCOL.INI file,
then click Next to continue (page 4-22).
Enter the information required for the TCP/IP SYSTEM.INI file, then
Enter the information required for the TCP/IP SYSTEM.INI file, then
click Next to continue — same as information required for NetBEUI.