Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
144
Trakker Antares 2400 Family System Manual
Standard, Transmit DC1-DC4
Standard, Transmit ABCD Start/Stop
Start/Stop
*$+CD21*
*$+CD22*
*$+CD21* *$+CD22*
Concatenated,
Transmit
Concatenated, Discard Start/Stop
ABCDStart/Stop
*$+CD30*
*$+CD31*
*$+CD30* *$+CD31*
Concatenated, Transmit DC1-DC4 Start/Stop
*$+CD32*
*$+CD32*
Code 11
Terminals: All Trakker Antares terminals configured for non-decoded scanning.
Description: Enables or disables decoding of Code 11 symbology. Code 11 is a very
high density, discrete numeric bar code. It is most extensively used in
labeling telecommunications components and equipment.
labeling telecommunications components and equipment.
Syntax: CGdata
Acceptable values for data are:
0 Disabled
1
1
Code 11 enabled with one check digit
2
Code 11 enabled with two check digits
Default: Disabled
Menu System: Main Menu > Configuration Menu > Symbologies Menu > Code 11
Bar Codes: Scan one of these bar codes:
Code 11 Enabled With One
Disable Code 11
Check Digit
*$+CG0*
*$+CG1*
*$+CG0* *$+CG1*
Code 11 Enabled With Two Check Digits
Code 11 Enabled With Two Check Digits
*$+CG2*
*$+CG2*