Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
197
Keypad Clicker
Terminals: All Trakker Antares terminals.
Description: Enables or disables the keypad clicker. The terminal sounds a click each
time you press a key or decode a row of a two-dimensional symbology.
Note: If the Beep Volume command is set to off, you will not hear any
audio signals including the keyclick.
audio signals including the keyclick.
Syntax: KCdata
Acceptable values for data are:
0
Disable keypad clicker
1
Enable keypad clicker
Default: Enabled
Menu System: Main Menu > Configuration Menu > Terminal Menu > Keypad
Bar Codes: Scan one of these bar codes:
Disable Keypad Clicker
Enable Keypad Clicker
*$+KC0*
*$+KC1*
*$+KC0* *$+KC1*
Keypad Control
Terminals: All Trakker Antares terminals.
Description: Enables or disables the keypad. When you disable the keypad, you cannot
use the keypad to enter information into the terminal.
Syntax: KEdata
Acceptable values for data are:
0 Disable
keypad
1 Enable
keypad
Default: Enabled
Menu System: Not
supported
Bar Codes: Scan one of these bar codes:
Disable Keypad
Enable Keypad
*$+KE0*
*$+KE1*
*$+KE0* *$+KE1*