Intermec 2430 User Guide
Chapter 6—Configuration Command Reference
206
Trakker Antares 2400 Family System Manual
Characters for Modem Dial Sequence (continued)
Character
Description
&
Wait for credit card dialing tone
,
Pause
(
Ignored. You can use this character to format the dial sequence.
)
Ignored. You can use this character to format the dial sequence.
-
Ignored. You can use this character to format the dial sequence.
.
Ignored. You can use this character to format the dial sequence.
<space>
Ignored. You can use this character to format the dial sequence.
Default: 0 (no dial sequence)
Menu System: Not
supported
Bar Codes: To set the default modem dial sequence, scan this bar code:
Default Modem Dial Sequence
*$+YD3*
*$+YD3*
Or: To set the modem dial sequence for COM3:
Note: To set this command using the bar code labels from the “Full ASCII
Bar Code Chart” on page 284, you must configure the terminal to use
Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
Bar Code Chart” on page 284, you must configure the terminal to use
Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
1
Scan this bar code:
Enter Accumulate Mode / Set Modem Dial Sequence
*+/$+YD3*
*+/$+YD3*
2
Scan a value for data from the “Full ASCII Bar Code Chart” on page
284. The modem dial sequence can be from 1 to 25 characters.
284. The modem dial sequence can be from 1 to 25 characters.
3
Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Modem Initialization Sequence
Terminals: 2420 with modem option.
Description: Defines an initialization string that the terminal sends to the modem
before the modem dial sequence.