Intermec 2430 User Guide

The 2430 is a programmable data collection terminal that runs custom 
batch applications. The 2430 has a flash drive to store applications and 
files and an integrated I/O port to transmit data to and accept data from a 
host computer or other serial device using RS-232 communications. The 
versatile display features of the 2430 allow you to resize the screen up to 21 
lines by 31 characters based on operator preference and work environment. 

The 2435 has all of the same functionality as the 2430 with the additional 
ability for real-time communications through an RF network. The 2435 
can communicate with a host either through the access points and the 
Intermec Gateway or DCS 30X, or directly through the access points. The 
2435 can also run client/server applications, TE 2000 terminal emulation 
applications and dcBrowser, which lets you run web-based applications. 

The 2455 is a vehicle-mount data collection terminal that can 
communicate in an RF network. You can use this programmable terminal 
to run client/server applications, terminal emulation applications, and 
dcBrowser, which lets you run web-based applications. 

The Trakker Antares 2460 and 2461 stationary terminals are desktop data 
collection terminals. You can use these programmable terminals to run 
client/server applications such as work-in-process, time and attendance, or 
document tracking. 

The 2460 is a programmable data collection terminal that uses serial ports 
to transmit data to and receive data from a host or PC. The 2460 has two 
serial ports, COM1 and COM2. 

The 2461 is a programmable data collection terminal that has both a serial 
port and an Ethernet connector to transmit data and receive data. 

 

Note: The 246X terminals are mentioned in this manual; however, the 
primary source of information for these terminals is the user’s manual. For 
help using the 246X, see the Trakker Antares 246X Stationary Terminal 
User’s Manual (P/N 068575).