Intermec 2430 User Guide
Appendix A—Default Configurations and Command Syntax
272
Trakker Antares 2400 Family System Manual
Default Configuration
The next tables list the terminal’s default configuration values. You can use
the TRAKKER Antares 2400 Menu System to set the terminal to the
default configuration. For help, see “Restoring the Terminal’s Default
Configuration” on page 30.
the TRAKKER Antares 2400 Menu System to set the terminal to the
default configuration. For help, see “Restoring the Terminal’s Default
Configuration” on page 30.
Not all configuration commands apply to all terminals. To determine
which commands apply to your Trakker Antares
which commands apply to your Trakker Antares
®
terminal, see
“Configuration Commands Listed by Category” starting on page 125.
Bar Code Symbology Default Configuration
Bar Code
Symbology
Symbology
Default Value
Codabar Disabled
Code 11
Disabled
Code 2 of 5
Disabled
Code 39
Full ASCII Code 39 enabled with no check digit
Code 93
Disabled
Code 128
Standard
Interleaved 2 of 5
Disabled
MSI
Disabled
PDF417 Disabled
Plessey
Disabled
UPC/EAN
UPC-A/EAN-13 enabled, UPC-E and EAN-8 enabled,
supplementals allowed, transmit check digit, transmit
number system digit, and retain leading zero for UPC-A
supplementals allowed, transmit check digit, transmit
number system digit, and retain leading zero for UPC-A
GTIN Compliance
Disabled
Operations Default Configuration
Operations Command
Default Value
Append Time
Disabled
Automatic Shutoff
0 minutes (disabled)
Beep Duration
150 ms high, 50 ms low (243X)
50 ms high, 50 ms low (241X, 242X, 2455, 246X,
2475, 248X)
50 ms high, 50 ms low (241X, 242X, 2455, 246X,
2475, 248X)
Beep Frequency
2400 Hz high, 1400 Hz low (241X)
1900 Hz high, 1050 Hz low (243X)
2400 Hz high, 1200 Hz low (242X, 2455, 2475,
248X)
1900 Hz high, 1050 Hz low (243X)
2400 Hz high, 1200 Hz low (242X, 2455, 2475,
248X)
Beep Volume
Very loud
Character Set
U.S. ASCII
Command Processing
All reader commands enabled