Intermec 2430 User Guide

nugget

39 AGaramond

Type C R 5 2 4 0 1 and press ;. 

Select Protocol Opts > Data Stream, and then select the appropriate 
TE 2000 configuration. 

Save your changes by selecting Exit Menus from the TE 2000 main 
menu. Press Y, and type C R 5 2 4 0 1 at the Enter 
Password prompt. 

For information about using TE 2000 IBM 3270, TE 2000 IBM 5250, or 
TE 2000 VT/100/220/320 and ANSI terminal emulation, see the 
appropriate TE 2000 guide: 

•  TE 2000 5250 Terminal Emulation Programmer’s Guide (P/N 

977-055-004) 

•  TE 2000 3270 Terminal Emulation Programmer’s Guide (P/N 

977-055-003) 

•  TE 2000 VT/ANSI Terminal Emulation Programmer’s Guide (P/N 

977-055-005) 

On your terminal, access the TRAKKER Antares 2400 Menu System by 
pressing ) ; 2 4 8 or by scanning this bar code: 

  TRAKKER Antares 2400 Menu System 

 

*..-.* 

 *..-.* 

From the Main Menu, choose System Menu > File Manager. 

Select drive C and then press Enter. A list of applications that are 
loaded on your terminal appears. If you have the dcBrowser client 
loaded on your terminal, this filename is listed: 

 DCBT24.BIN 

If you do not see this filename, you do not have the dcBrowser client 
loaded on your terminal. 

For information about using dcBrowser, see the online help that ships with 
your dcBrowser gateway software. 

Unless you have the 802.1x security option, you can run APPTSK.BIN or 
EM9560.BIN.  

This application is the default application on all terminals. If you exit an 
application or if certain errors occur, the terminal resets and runs