Intermec 2430 User Guide
nugget
39 AGaramond
Appendix D—Using Default and Optional Applications
Trakker Antares 2400 Family System Manual
313
Example 3
Connect the TD2400 communications dock to a serial port on the 2485.
Use a 2420 to collect data. Use the TD2400 communications dock to
upload data from the 2420 to the 2485. Data is transmitted to the 2485
and out the Ethernet or RF port to the connected network devices.
Use a 2420 to collect data. Use the TD2400 communications dock to
upload data from the 2420 to the 2485. Data is transmitted to the 2485
and out the Ethernet or RF port to the connected network devices.
Example 4
Use the 248X as a gateway between the CrossBar network and the
Ethernet or RF network. Connect the 248X as a downline device in your
CrossBar network. Connect the 2480/1 with the Ethernet option to your
Ethernet network, or connect the 2485/6 to your RF network. While
running the APPTSK.BIN or EM9560.BIN application, you can send
data from the Ethernet or RF network through the 248X to the 9154 or
9161 and vice versa.
Ethernet or RF network. Connect the 248X as a downline device in your
CrossBar network. Connect the 2480/1 with the Ethernet option to your
Ethernet network, or connect the 2485/6 to your RF network. While
running the APPTSK.BIN or EM9560.BIN application, you can send
data from the Ethernet or RF network through the 248X to the 9154 or
9161 and vice versa.
Example 5
Connect the COM1 serial port to the COM2 serial port on a 246X or
248X terminal. Use the terminal to configure itself by typing and entering
configuration commands on the keypad or keyboard.
248X terminal. Use the terminal to configure itself by typing and entering
configuration commands on the keypad or keyboard.
Example 6
Connect the serial port on the 248X to the serial port on the 246X
terminal. Use the 248X to configure the 246X by typing and entering
configuration commands on the 248X keypad.
terminal. Use the 248X to configure the 246X by typing and entering
configuration commands on the 248X keypad.
Using DOS on the Terminal
With the DOS option, the Trakker Antares terminals can run ROM-
DOS
DOS
™, which is compatible with DOS version 6.22. ROM-DOS
provides application compatibility at the DOS level and interface
compatibility at the BIOS level.
compatibility at the BIOS level.
On each DOS drive, filenames are customer defined using eight characters
with a three-character extension. You cannot define any subdirectories.
with a three-character extension. You cannot define any subdirectories.
24XXS085.eps
Drive C
Drive C
Drive C
DOS RAM
Drive
Optional read/write
DOS drive
DOS drive
64K read-only
flash DOS boot drive
flash DOS boot drive
Configurable DOS
RAM drive
RAM drive
750K flash
drive
drive
Drive
B
Drive A