Intermec 2430 User Guide
Appendix D—Using Default and Optional Applications
nugget
39 AGaramond
324
Trakker Antares 2400 Family System Manual
4
From the DOSTOOLS directory, type this command:
MAKE_A.BAT
The batch file creates the image file named DRIVEA.BIN that contains
all the files in the subdirectory DRIVEA.
all the files in the subdirectory DRIVEA.
5
Connect the PC to the terminal through a serial connection.
6
On the terminal, press ) ; 2 4 8 to access the TRAKKER
Antares 2400 Menu System. The Main Menu appears.
Antares 2400 Menu System. The Main Menu appears.
7
Choose System Menu > Upgrade Firmware, and choose OK to
continue. The next screen appears prompting you to continue
upgrading the firmware. In this case, you are not actually upgrading all
the firmware. You will only be replacing the files on drive A.
continue. The next screen appears prompting you to continue
upgrading the firmware. In this case, you are not actually upgrading all
the firmware. You will only be replacing the files on drive A.
8
Choose Yes to continue and upgrade drive A. The terminal reboots and
displays the Loader Waiting screen.
displays the Loader Waiting screen.
9
On your PC, open an MS-DOS window and change to the
DOSTOOLS directory.
DOSTOOLS directory.
10
On your PC, type this command:
PUT_A.BAT
The Loader screen appears and the DRIVEA.IMG file is transferred to the
terminal and used to replace the contents of drive A. Once the batch file is
complete and drive A is replaced, the terminal boots and displays the DOS
prompt.
terminal and used to replace the contents of drive A. Once the batch file is
complete and drive A is replaced, the terminal boots and displays the DOS
prompt.
Note: When you use PUT_A.BAT, you are replacing all files on drive A.
Customizing Drive B
Drive B is an optional read/write DOS drive. It contains an image of the
external ROM-DOS commands that are available by default on the
Trakker Antares terminal. Drive B resides as a subdirectory on drive C and
is limited by the space available on drive C.
external ROM-DOS commands that are available by default on the
Trakker Antares terminal. Drive B resides as a subdirectory on drive C and
is limited by the space available on drive C.
As with drive A, the contents of drive B cannot be changed directly. To
make configuration changes, you must use the DOS software tool
MAKE_B.BAT.
make configuration changes, you must use the DOS software tool
MAKE_B.BAT.
To change drive B, you must recreate the file DRIVEB.IMG. When you
do, you are replacing all files on drive B.
do, you are replacing all files on drive B.