Intermec 2430 User Guide
Chapter 2—Configuring and Managing the Terminals
18
Trakker Antares 2400 Family System Manual
Sending a Command From the DCS 300
You can use the DCS 300 to configure one or more terminals in your RF
or Ethernet network. The DCS 300 lets you group together terminals that
you want to receive the same reader and configuration commands.
or Ethernet network. The DCS 300 lets you group together terminals that
you want to receive the same reader and configuration commands.
This method is very efficient if you need to change the same configuration
parameters for several terminals in one area. For example, you may want to
set the Beep Volume to very loud and turn on Keypad Caps Lock for all
the terminals in one area.
parameters for several terminals in one area. For example, you may want to
set the Beep Volume to very loud and turn on Keypad Caps Lock for all
the terminals in one area.
Note: You can configure an RF or Ethernet terminal from the DCS 300,
but you cannot get configuration data from the terminal.
but you cannot get configuration data from the terminal.
To send commands from the DCS 300
1
Using the Download Server feature on the server, select the terminal or
group to which you want to download the reader and configuration
commands, and then choose Edit. For help configuring a group of
terminals, see the DCS 300 User’s Manual (P/N 067296).
group to which you want to download the reader and configuration
commands, and then choose Edit. For help configuring a group of
terminals, see the DCS 300 User’s Manual (P/N 067296).
2
In the Initialization Data box, choose the Command option button.
3
In the Initialization Data box field, enter the reader or configuration
command, and then choose Add. The command appears in the Files
and Data box.
command, and then choose Add. The command appears in the Files
and Data box.
For example, enter this command to set the Beep Volume to very loud:
$+BV4