Intermec 2430 User Guide

When you are done upgrading the firmware, the terminal returns to its 
default configuration. You will need to reconfigure the terminal. For 
help, see “How to Configure the Terminals” on page 12. 

If necessary, reload your custom applications and files on the terminal. 
For help, see “Using the Serial Port to Transfer Applications and Files” 
on page 55. 

 

Note: Make sure you back up your custom files and applications, such as 
TE 2000, dcBrowser, and ROM-DOS, so that you can reinstall them after 
the upgrade procedure. For help, see “Using the Serial Port to Transfer 
Applications and Files” on page 55. 

The Trakker Antares Firmware Upgrade Utility is included with the 
firmware upgrade. Install the utility (TAUPGRADE.EXE) on your PC.  

Use the online help that ships with the utility to upgrade the firmware 
on your terminal. 

If necessary, reload your custom applications and files on the terminal. 
For help, see “Using the Serial Port to Transfer Applications and Files” 
on page 55. 

If you ordered the optional 4MB flash drive (drive D), you can order a 
double-byte font and load the font on your terminal. To order a double-
byte font, contact your local Intermec representative.  

 

Note: Double-byte fonts are not available for terminals with the 802.1x 
security option. 

You can also order the Thai language font as a configuration option for the 
Trakker Antares 2400 Family. For help, contact your local Intermec 
representative. Use the next table to determine which file name you need.  

Simplified Chinese, VT 

24DBCSCT.FON 

Simplified Chinese, 5250 

24DBCSCL.FON 

Japanese EUC (unix), VT 

24DBCSJT.FON 

Japanese, 5250 

24DBCSJL.FON 

Korean, VT 

24DBCSKT.FON 

Korean, 5250 

24DBCSKL.FON