Intermec 3010 Installation Instruction
MaxiScan 3300 – Installation Guide – Edition 2.0
51
7 Troubleshooting
This section describes things you can try if you have problems with your MaxiScan
3300 during power-up, configuration and normal operation.
3300 during power-up, configuration and normal operation.
If you can not solve the problem yourself, please contact your Intermec representative.
Before you contact your Intermec representative
Go through the checklists below if you have any of the following problems:
•
no LEDs
•
no beeps
•
error beeps
•
no transmission
•
incorrect transmission
Setup problems—Checklist
❏
system connected up correctly
❏
system switched on
❏
correct power-up beep indication—2 beeps
❏
first and subsequent configuration bar codes are read before the end of the
default one minute configuration timeout. See
default one minute configuration timeout. See
Basic offline setup in Section 5—
Setup for more information
Reading problems—Checklist
❏
correct symbologies selected for the bar codes you are trying to read
❏
symbologies you read are available for your MaxiScan 3300
❏
all unnecessary symbologies disabled
❏
continuous configuration mode disabled (configuration inhibit after 1 minute
selected)
selected)
❏
barcode length compatible with minimum / fixed length parameter settings of
MaxiScan 3300
MaxiScan 3300
❏
MaxiScan 3300 configured for check digit and no check digit present in code