Intermec 9710 Reference Guide
C d 39
Wyse Series
95
Wyse Series
This section covers these workstations:
• Wyse 30
• Wyse 2108
• Wyse 60
• Wyse 2112
• Wyse 85
• Wyse 2116
• Wyse 150
• Wyse 2200
• Wyse 160
• Wyse 3216
• Wyse 185
• Wyse 3225
• Wyse 285
• Wyse 3116SX
• Wyse 325
• Wyse WM-15C
• Wyse WM-17C
The individual Wedge Interface Guide corresponding to this section is part number
054130.
054130.
Cables
Use the two cables supplied with this WIF kit to connect the reader to your workstation
and keyboard, as shown in your Wedge Reader User’s Manual. To order a replacement
cable, use these part numbers:
and keyboard, as shown in your Wedge Reader User’s Manual. To order a replacement
cable, use these part numbers:
• Wedge interface kit (P/N 054129)
• Keyboard cable (P/N 054128)
• Terminal cable (P/N 054127)
• Keyboard cable (P/N 054128)
• Terminal cable (P/N 054127)
Power Supply
The reader requires an external power supply to operate with these workstations. Set the
PCB jumper to connect pins 2 and 3 on the reader’s rear panel.
PCB jumper to connect pins 2 and 3 on the reader’s rear panel.
Note: If you use an external power supply with the reader, you must plug in the power
supply before switching on the workstation. If you do not, the reader will lock up.
supply before switching on the workstation. If you do not, the reader will lock up.