Intermec 9745 User Guide
12
Or you can connect the base station to these Intermec readers
and terminals:
and terminals:
•
944X Portable Terminals
•
95XX Network Terminals
•
TRAKKER
®
Antares™ 24XX Terminals
•
97XX Wedge Readers
•
JANUS™ 2010 Terminals (J2010 and JG2010)
•
5900 Vehicle-Mount Terminal
•
1700 Handheld Terminal
•
64XX Handheld Terminals
•
65XX Vehicle-Mount Terminals
To connect the base station to a terminal, computer, or reader
1. Turn off the terminal, computer, or reader.
2. Connect the cable to the base station.
•
If your cabling requires an external power supply,
connect the power supply to either the base station
power port or the Y jack. Plug the power supply in
before any other cables.
connect the power supply to either the base station
power port or the Y jack. Plug the power supply in
before any other cables.
•
If you use the base station in an environment where it
can get wet, such as outside or by an open door, connect
the auxiliary cable to the base station and cover the host
port.
can get wet, such as outside or by an open door, connect
the auxiliary cable to the base station and cover the host
port.
•
If you use the base station in a protected environment,
such as inside a warehouse, connect the host cable to the
base station.
such as inside a warehouse, connect the host cable to the
base station.
3. Connect the other end of each cable to the terminal,
computer, reader, and power supply.
For more help installing, configuring, and programming your
base station, refer to the Sabre 1552 Laser Scanner and
MicroBar 9745 Base Station System Manual. For help finding
this manual, see “Where to Find More Information” on page 18.
base station, refer to the Sabre 1552 Laser Scanner and
MicroBar 9745 Base Station System Manual. For help finding
this manual, see “Where to Find More Information” on page 18.