Intermec nx Reference Guide
Symbologies
144
MB/NX/RM/00/E/970131
Default symbologies
Code 39 and the UPC/EAN code families are preselected by default.
When you install and set up your MicroBar NX for the first time, all
the symbology parameters are set to their factory default settings—
indicated by an asterisk (*) in this manual.
the symbology parameters are set to their factory default settings—
indicated by an asterisk (*) in this manual.
The symbology default settings are global factory defaults—they are independent of the
different symbology activation codes.
different symbology activation codes.
If you want to reset all the default symbology settings, you can scan the Reset Factory
Defaults bar code (
Defaults bar code (
Ð
Reset all configuration parameters
), but you will then have to
completely reconfigure your MaxiScan 2200. It is often easier to scan Disable All
Symbologies and reactivate individual symbologies (
Symbologies and reactivate individual symbologies (
Ð
Symbologies—Activation
).
Keep a list of your custom settings—this will be useful if you have to perform a reset.
Character formats and MicroBar NX transmission format
symbology
character format supported
MicroBar NX transmission
format
•
Code 39
alphanumeric—letter case not
defined
defined
upper case
•
Code 93
•
Code 128
•
Telepen
alphanumeric full ASCII—letter
case defined
case defined
full ASCII—lower case/upper
case as defined
case as defined
•
Ames Code
•
Codabar
•
Code 11
•
Interleaved 2 of 5
•
Matrix 2 of 5
•
Standard 2 of 5
•
UPC/EAN code set
numerical
numerical