Intermec nx Reference Guide
Code mark
MB/NX/RM/00/E/970131
21
AIM symbology identifiers
AIM symbology identifiers are optional 3-character code marks that have been standardized
by the AIM Committee.
by the AIM Committee.
AIM symbology identifiers are transmitted after the preamble if present and before the
barcode data.
barcode data.
Selecting AIM Transmitted automatically activates AIM symbology identifier
transmission for all symbologies.
transmission for all symbologies.
M
AIM symbology identifiers should only be activated for keyboard wedge and
RS-232 interfaces.
AIM Not Transmitted (*)
AIM Transmitted
Identifier syntax
AIM symbology identifiers consist of 3 characters which provide the
following information:
following information:
•
the character " ] " indicates that the input source type is a bar code,
•
a letter (A, B, C, . . . ) identifies the symbology,
•
a hexadecimal number identifies any special processing performed
by the MicroBar NX.
by the MicroBar NX.
Example
If you select AIM Transmitted, a standard Code 39 code without check digit
and containing the string CODE-39 will be transmitted as follows:
and containing the string CODE-39 will be transmitted as follows:
]A0CODE-39
The table on the next page provides the list of symbology identifiers
and processing options supported.
and processing options supported.