Intermec 1555 Reference Guide
Getting Started
2-7
2
Using Quick Mode Select
Use the Quick Mode Select feature to choose an operating mode. You can also
customize your Sabre 1555 operating modes by configuring that mode via Setup
mode, if the setup is enabled.
customize your Sabre 1555 operating modes by configuring that mode via Setup
mode, if the setup is enabled.
To choose an operating mode perform the following steps:
1.
1.
Press and hold the Mode button to display the operating modes currently
available in Quick Mode Select.
available in Quick Mode Select.
Note: If you have a 1555 PDT model and the LCD screen is blank, pull the trig-
ger to activate the product before pressing the Mode button. The Sabre 1555 goes
into sleep mode after 40 seconds of inactivity.
ger to activate the product before pressing the Mode button. The Sabre 1555 goes
into sleep mode after 40 seconds of inactivity.
2.
Release the Mode button when the operating mode you want to select displays on
the LCD screen.
the LCD screen.
Note: If you miss the mode you want to select, hold the Mode button until the
desired mode displays again.
desired mode displays again.
If you cannot find the operating mode you want to select, you will have to add it to
Quick Mode Select (see “Customizing Quick Mode Select” on this page).
Quick Mode Select (see “Customizing Quick Mode Select” on this page).
Customizing Quick Mode Select
You can customize Quick Mode Select to include only the operating modes you want
to use for your application (this makes it quicker and easier to switch between
operating modes).
to use for your application (this makes it quicker and easier to switch between
operating modes).
1.
Press and hold the Mode button, then press and hold the trigger for a second or
two until Setup displays on the LCD.
two until Setup displays on the LCD.
The first Setup option is Quick Mode Select. If you do not see this option on the
LCD, keep pulling the trigger to cycle through the Setup options until you find
Quick Mode Select.
LCD, keep pulling the trigger to cycle through the Setup options until you find
Quick Mode Select.
2.
Press the Mode button to enter the Quick Mode Select setup menu.
3.
Pull the trigger to cycle through the different operating mode options until you
find an item you want to add or remove.
find an item you want to add or remove.
4.
Use the Mode button to add or remove the item:
the
•
symbol means the operating mode will be enabled to Quick Mode Select
the
ο
symbol means the operating mode will be disabled from Quick Mode
Select
5.
Pull the trigger to display the next operating mode and use the Mode button to
change the setting if required.
change the setting if required.
6.
When you finish, pull the trigger until you see Exit and press the Mode button to
exit the Quick Mode Select setup menu.
exit the Quick Mode Select setup menu.