Intermec 1470 User Guide
1470/1471 Imager User’s Manual
4-40
Check Digit
This selection allows you to specify whether the check digit should be transmitted at the
end of the scanned data or not.
end of the scanned data or not.
In the UPC/EAN tab of Visual Menu, choose Version 13 Check Digit Transmit under
EAN/JAN Version 13. Click the Write Settings to Device button (
) to send the new
setting to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
Transmit Check Digit
Don’t Transmit Check Digit
*