Intermec 1470 User Guide
1470/1471 Imager User’s Manual
4-52
UPC E0 On/Off
Most UPC bar codes lead with the 0 number system. For these codes, use the UPC E0
selection. If you need to read codes that lead with the 1 number system, use the UPC E1
selection (see “UPC E1 On/Off” later in this chapter).
selection. If you need to read codes that lead with the 1 number system, use the UPC E1
selection (see “UPC E1 On/Off” later in this chapter).
In the UPC/EAN tab of Visual Menu, choose Version E0 Decoding On under UPC
Version E. Click the Write Settings to Device button (
) to send the new setting to
the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
On
Off
*