Intermec 1470 User Guide
Programming the 147X
3-19
3
Word Length Stop Bits
Word Length can be set to one or two stop bits.
In the Communication tab of Visual Menu, type 1 or 2 in the Stop Bits entry field. Click
the Write Settings to Device button (
) to send the new setting to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
1 Stop Bit
*
2 Stop Bits
Hardware Flow Control
When Hardware Flow Control is On, the software checks for a CTS signal before
sending data. This option is useful when your application supports the CTS signal.
sending data. This option is useful when your application supports the CTS signal.
In the Communication tab of Visual Menu, choose Hardware Flow Control. Click the
Write Settings to Device button (
) to send the new setting to the imager.