Intermec 1470 User Guide
1470/1471 Imager User’s Manual
3-34
Presentation Lights
When using the imager in presentation mode, the illuminating LEDs can be
programmed on or off. If there is sufficient ambient light, the LEDs can be turned off by
scanning the Lights Off bar code below. When a bar code is presented to the imager, the
illuminating LEDs turn on to scan the bar code, and then turn off when the bar code has
been read.
programmed on or off. If there is sufficient ambient light, the LEDs can be turned off by
scanning the Lights Off bar code below. When a bar code is presented to the imager, the
illuminating LEDs turn on to scan the bar code, and then turn off when the bar code has
been read.
In the Imager tab of Visual Menu, choose Lights On During Presentation Mode. Click
the Write Settings to Device button (
) to send the new setting to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
On
*
Off