Intermec 1470 User Guide
1470/1471 Imager User’s Manual
3-74
In the Output Sequence tab of Visual Menu, choose Multiple Bar Codes. Click the
Write Settings to Device button (
) to send the new settings to the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
On
Off
*
No Read
With No Read turned On, the imager notifies you if a code cannot be read. In the
QuickView Scan Data Window, an “NR” appears when a code cannot be read. For
information on the Scan Data Window, see Chapter 5, “Using QuickView.” If No Read
is turned Off, the “NR” will not appear.
QuickView Scan Data Window, an “NR” appears when a code cannot be read. For
information on the Scan Data Window, see Chapter 5, “Using QuickView.” If No Read
is turned Off, the “NR” will not appear.
In the Output Sequence tab of Visual Menu, choose Show ‘No Read’. Click the Write
Settings to Device button (
) to send the new settings to the imager.