Intermec 1470 User Guide

By default, the imager will power down after 2 minutes of inactivity. If you wish to
keep the imager powered up indefinitely, choose Device - Hold Power. To reset the
imager to the default power setting, choose Device - Remove Power Hold.

If you wish to control the imager’s trigger with the software, you can select Device -
Trigger On or Device - Trigger Off. These settings turn the trigger on and off just as if
you were holding the trigger or releasing it manually. This feature may be necessary
when working with a fixed device that has no trigger.

Choose View - Serial Command Window to display the Command Center window,
which allows you to enter serial commands to the imager. Choose View - Scan Data
Window to open a window that displays serial data in a text format.

Serial commands are used to program the imager and to query the imager about
programming parameters. For a list of the serial programming commands, see “Serial
Programming Commands” later in this section. For information about performing
queries, see “Query Commands” later in this chapter.