Intermec SR60 Reference Guide

This section describes the MSI/Plessey options and contains the 
programming bar codes you can use to configure those options.

The MSI/Plessey symbology has the following programmable 
features:

• Check  Digit

• Label Length Format

• Read  Verification

Check Digit calculates the check digit(s) to verify the labels 
contents have been read correctly. If you enable this feature, your 
bar codes must include one or two check digits. You may also 
choose to transmit or not transmit the check digit(s).

• The Calculate bar code on page 132 enables calculation of the 

check digits. The Don’t Calculate bar code disables 
calculation.

• The Transmit bar code on page 132 enables transmission of 

MSI/Plessey check digit(s). The Don’t Transmit bar code 
disables transmission.

• The One Check Digit bar code and the Two Check Digits bar 

code on page 132 specifies either one or two check digits.

Label length format permits the selection between variable length 
or fixed length formats. For best performance, Intermec 
recommends that you use the Fixed Length settings when your 
application requires only one or two label lengths.

• The Enable Variable Length Format bar code on page 133 

directs the scanner to read all labels from the minimum label