Intermec SR60 Reference Guide
SR60 Scanner Programmer’s Reference Manual
iii
Document Change Record
This page records changes to this document. The document was
originally released as version 001.
originally released as version 001.
Version
Number Date
Number Date
Description of Change
002
6/2006
Revised to support RoHS compliance. New
information includes an updated list of
supported interface cables, scanners supported
interfaces, and minor changes to the factory
default configuration settings.
information includes an updated list of
supported interface cables, scanners supported
interfaces, and minor changes to the factory
default configuration settings.
003
10/2006 • Incorporated the SR60 Scanner Instructions –
Important USB Information! (P/N 943-091-
001) and the SR60 Programmer’s Reference
Manual Addendum (P/N 941-003-001).
001) and the SR60 Programmer’s Reference
Manual Addendum (P/N 941-003-001).
• Added the standard range (SR) version of the
scanner.
• Added specific information about the USB
interface, including the Code 39 Emulate
Functions Keys feature and setting and
EOM.
Functions Keys feature and setting and
EOM.
• Added the Full ASCII Chart and the ASCII
Extended Chart to Appendix B.
004
12/2006 Corrected bar codes for the “To set pre-noise or
post-noise transitions” procedure on page 17
and added a bar code to the “To set a prefix or
suffix for a USB interface” procedure on
page 54.
and added a bar code to the “To set a prefix or
suffix for a USB interface” procedure on
page 54.