Intermec 4800 User Guide

Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the one 
the host program is expecting.  If this is the case, scan the bar code below, select 
the code page with which the bar codes were created (see 

 on page A-5), and scan the value and the Save bar code 

 on the inside the back cover of this manual.  The 

data characters should then appear properly.

<Default All Code 2 of 5 Settings>

Scan the bar codes below to change the message length.  Refer to 

 (page 7-2) for additional information.  Minimum and Maximum 

lengths = 1-48.  Minimum Default = 4, Maximum Default = 48.

Code 93 Code Page

On

*  Off

Minimum Message Length

Maximum Message Length