Intermec 4800 User Guide

To create this template, you would enable the OCR-A font.  Scan the 

User-Defined Variable g symbol (

414243 from the 

 (the hex characters for “A,” “B,” and “C”).  Scan 

OCR Template (

).  This will let you read either A or B or C in any 

position where you place the g.  For example, you could create the following 
template:

ddddddggg

This template would then let you read data that began with six digits, and had 
an A, B, or C trailing.  So you would be able to read:

654321ABC

or

654321BAC

or

654321CCC

The  IT4600/4800 is capable of decoding multi-row OCR text.  

Note: Reading rows longer than sixteen characters is not recommended.

Consider the following example.  This example shows serial commands as they 
would be entered using Quick*View.

Example:  You need to read multiple rows of OCR-A data as shown below:

12345678
ABCDEFGH

First, enable the OCR-A font.  To read the first row of OCR data, you would 
program the following template:

OCRTMP"dddddddd".

This template is the default OCR template.  If you wanted to read the second 
line of data, you would use the following template: 

OCRTMP"llllllll".

To read both lines of OCR at one time, use the variable 

r to indicate the start 

of a new row.  All the other templating variables for the individual rows work 
the same as previously described.  For instance, in the above example, you 
would use the following template to read both rows:

OCRTMP"ddddddddrllllllll".