Intermec 4800 User Guide

If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” 
you can edit the output message using the 

code for the No Read symbol is 9C.  

Print Weight is used to adjust the way the imager reads Matrix symbols.  If a 
imager will be seeing consistently heavily printed matrix symbols, then a print 
weight of 6 may improve the reading performance.  For consistently light printing, 
a print weight of 2 may help.  After scanning the 

Set Print Weight bar code, set 

the print weight (from 1-7) by scanning digits from the inside back cover, then 
scanning 

Save.  Default = 4.

Video Reverse is used to allow the imager to read bar codes that are inverted.  
The “Off” bar code below is an example of this type of bar code.  If additional 
menuing is required, Video Reverse must be disabled to read the menu bar 
codes and then re-enabled after menuing is completed.

Note: Images downloaded from the unit will not be reversed.  This is a setting for 

decoding only.

Set Print Weight

* Default

On

* Off