Citel 6000 User Guide
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
85
Utilities (Gateway and EXTender)
Setting the Date (Gateway and EXTender)
The Real Time Clock (RTC) provides an accurate date/time stamp for log messages and
statistics used in the Management Interface (MI) in both the Remote and Gateway. The time is
displayed using a 24 hour clock.
Example:
Date: September 10, 2004
Time: 14:49:24 (no a.m. or p.m.- 24 hour clock)
statistics used in the Management Interface (MI) in both the Remote and Gateway. The time is
displayed using a 24 hour clock.
Example:
Date: September 10, 2004
Time: 14:49:24 (no a.m. or p.m.- 24 hour clock)
Procedure
1. Access the Set Date Menu from the Main Menu using the following path:
Path: ->Utilities->System->Set
date
The following menu appears:
Figure 38: Set Date Menu
2. Press
the
↓ key to access each parameter and fill in the appropriate information as required.
Note: Press the
→
key to scroll through the choices for Month.
3. Press
the
← key to accept changes and go back to the System menu.
Note: The PBXgateway and EXTender 6000 preserve their date and time even when power is lost.
The EXTender 4000 will lose its date and time after loss of power but will retain it once it connects to
a Gateway.
The EXTender 4000 will lose its date and time after loss of power but will retain it once it connects to
a Gateway.
Set Enet Mode (Gateway and EXTender)
The Set Enet Mode parameter on the Gateway and Remote allows you to select the AUX LAN or LAN
mode.
Procedure:
1. Select
mode.
Procedure:
1. Select
Set Enet Mode using the following path:
Path:
Utilities->System->Set Enet Mode
2. The LAN setting will be displayed. Hit Enter to continue.
3. Set LAN Mode to either 10 Mb-Half Duplex, 100 Mb-Half Duplex or Auto.