Sony BDV-N790W User Guide

Page of 64
20
US
Gettin
g
 Star
ted
• If security is set on your wireless network, the 
security key (WEP key, WPA key)**.
* SSID (Service Set Identifier) is a name that 
identifies a particular wireless network.
** You need to check the settings of your wireless 
LAN router to get the information about SSID and 
security key. For details:
– visit the following website:
http://www.sony.com/blurayhtsupport/
– refer to the instruction manual supplied with the 
wireless LAN router
– consult the manufacturer of the wireless LAN 
router
About wireless LAN security
Since communication via the wireless LAN 
function is established by radio waves, the 
wireless signal may be susceptible to 
interception. To protect wireless 
communication, this system supports various 
security functions. Be sure to correctly 
configure the security settings in accordance 
with your network environment.
No Security
Although you can easily make settings, anyone 
can intercept wireless communication or intrude 
into your wireless network, even without any 
sophisticated tools. Keep in mind that there is a 
risk of unauthorized access or interception of 
data.
WEP
WEP applies security to communications to 
prevent outsiders from intercepting 
communications or intruding into your wireless 
network. WEP is a legacy security technology 
that enables older devices which do not support 
TKIP/AES to be connected.
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed in 
response to the deficiencies of WEP. TKIP 
assures a higher security level than WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an 
advanced security method distinct from WEP 
and TKIP.
AES assures a higher security level than WEP or 
TKIP.
Step 4: Setting up the 
Wireless System
The unit transmits sound to the surround 
amplifier that is connected to the surround 
speakers. To activate wireless transmission, 
perform the following Steps.
1
Insert the wireless transceiver into the 
unit.
2
Insert the wireless transceiver into the 
surround amplifier.
3
Connect the AC power cord (mains 
lead) of the unit.
Before connecting the AC power cord, 
make sure all connections in “Step 2: 
Connecting the System” (page 14) ar

secure.
Rear panel of the unit
Wireless transceiver
Rear panel of the surround amplifier
EZ
W-R
T5
0
Wireless transceiver