SATO CG412 User Guide
Section 7: Interface Specifications
CG4 Series Operator Manual
Page 7-11
7.5 LOCAL AREA NETWORK (LAN) ETHERNET
7.5.1 Basic Specifications of LAN
A Local Area Network (LAN) interface requires a driver shipped with each printer that has the interface
installed. The driver must be loaded on the host computer and configured to run one of the supported network
protocols using a 10/100BaseT LAN connection.
installed. The driver must be loaded on the host computer and configured to run one of the supported network
protocols using a 10/100BaseT LAN connection.
Interface connector
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Cable length: 100m or less
Link/Status LED
Status LED lights up when establishing the LINK with Ethernet equipment. The
LINK is established by Auto Negotiation.
LINK is established by Auto Negotiation.
LED
Color
Conditions
LINK
Green
Lights up when establishing the LINK
SPEED
Orange
Lights off when recognizing the destination
10BASE-T
Lights up when recognizing the destination
100BASE-TX
10BASE-T
Lights up when recognizing the destination
100BASE-TX
COLLISION
Red
Lights up when collision occurs
Maintenance function
[Printing LAN configuration information]
LAN configuration information will be printed on the third sheet of user test print
and factory test print.
[Initializing LAN configuration information]
LAN configuration information will be initialized through [All Clear] of Factory
Clear Mode. For more details, refer to the authorised SATO servicing personnel.
LAN configuration information will be printed on the third sheet of user test print
and factory test print.
[Initializing LAN configuration information]
LAN configuration information will be initialized through [All Clear] of Factory
Clear Mode. For more details, refer to the authorised SATO servicing personnel.
Interface type
Use Printer configuration tool or <DI> command.
<DI>a
<DI>a
Parameter
Item
Value
Decription
a
Interface
0
USB
1
LAN