IBM 600e User Guide
4
In “Install New Modem Setup,” click on Dial-Up Networking
Serial Cable between 2 PCs, and follow the instructions on
the screen.
Serial Cable between 2 PCs, and follow the instructions on
the screen.
5
Make sure this serial cable COM port is already assigned for
your infrared port.
your infrared port.
6
Restart the computer when the RAS setup is completed.
You can connect your computer to the RAS server using the infrared
port if your RAS server is also configured for using an infrared
device.
port if your RAS server is also configured for using an infrared
device.
Installing the ThinkPad Modem Driver for Windows NT
To install the ThinkPad Modem driver for Windows NT:
1
Start Windows NT and insert the ThinkPad Modem for
Windows 95/98/NT Disk 1 in the diskette drive.
Windows 95/98/NT Disk 1 in the diskette drive.
2
Select Run... from the Start menu.
3
Type
A:\SETUP
in the window.
4
Click on OK and follow the instructions on the screen.
Note:
Non-U.S. users must run the Country Selection program in the
ThinkPad Modem window after the ThinkPad Modem
installation is complete. Restart the computer after you run
Country Selection.
ThinkPad Modem window after the ThinkPad Modem
installation is complete. Restart the computer after you run
Country Selection.
If you want to configure the ThinkPad Modem:
Configuring the
ThinkPad Modem for Windows NT
Configuring the ThinkPad Modem for Windows NT
After installing the ThinkPad Modem driver, assign a communication
port (COM port) for the ThinkPad Modem:
port (COM port) for the ThinkPad Modem:
1
In Windows NT, select Programs, ThinkPad, and ThinkPad
Configuration.
Configuration.
2
Click on Modem.
3
Specify the necessary settings in the window.
138
IBM ThinkPad 600E Online Book