IBM 600e User Guide
call, only a blank screen is displayed. To display a power-on
password prompt, press any key or move your pointing device.
password prompt, press any key or move your pointing device.
If you are using some communication cards and the computer is
powered with ac power, your computer enters standby mode
rather than suspend mode.
rather than suspend mode.
If you are using other PC Cards and the computer enters
suspend mode, all application programs stop. For some PC
Cards, power to the PC Cards might also turn off.
suspend mode, all application programs stop. For some PC
Cards, power to the PC Cards might also turn off.
If the computer is powered with battery power, the computer
turns power off to the PC Card, and communication stops for
communication PC Cards, so the duration of suspend mode is
longer.
communication PC Cards, so the duration of suspend mode is
longer.
If communication for a PC Card is not reestablished after normal
operation resumes, remove and then reinstall the PC Card
before restarting the system or application program. For other
kinds of PC Cards, if the PC Card or computer does not operate,
restart the application or computer.
operation resumes, remove and then reinstall the PC Card
before restarting the system or application program. For other
kinds of PC Cards, if the PC Card or computer does not operate,
restart the application or computer.
Even if you are using a communication card with a ring-resume
function, some cards cannot detect an incoming call.
While a communication link is active, the computer does not
enter suspend mode.
enter suspend mode.
If you put a check mark in the Disable in the hardware profile
check box under the Device usage of the General tab in the
Advanced Power Management Support area of the “System
Properties” window, your computer does not enter suspend
mode.
Advanced Power Management Support area of the “System
Properties” window, your computer does not enter suspend
mode.
40
IBM ThinkPad 600E Online Book