IBM 600e User Guide
The default resources are as follows:
I/O 13 -13F
I/O 2F8-2FF
IRQ 3
IRQ 1
DMA 7
I/O 2F8-2FF
IRQ 3
IRQ 1
DMA 7
Attention
An IRQ can be shared in Windows 98 and Windows 95. If you
have a multipartitioned hard disk drive or have multiple hard disk
drives, and reboot another operating system or install another
operating system, the CMOS status and the hardware settings
might not remain consistent and the devices sharing an IRQ
might become unusable. It is recommended that you use the
system in its default IRQ status, unless you must have the IRQ
shared—for example, because you are using multiple PC Cards
and the docking station simultaneously.
have a multipartitioned hard disk drive or have multiple hard disk
drives, and reboot another operating system or install another
operating system, the CMOS status and the hardware settings
might not remain consistent and the devices sharing an IRQ
might become unusable. It is recommended that you use the
system in its default IRQ status, unless you must have the IRQ
shared—for example, because you are using multiple PC Cards
and the docking station simultaneously.
To share an IRQ, do the following:
1
Click on Start, Programs, and ThinkPad Configuration.
2
Double-click on the Internal Modem icon.
3
Click on the Device Manager button.
4
Double-click on IBM Digital Signal Processor.
5
Double-click on ThinkPad Digital Signal Processor.
6
Put a check mark in the Disable in this hardware profile
check box by clicking on it; then click on OK.
check box by clicking on it; then click on OK.
7
Double-click on ThinkPad Digital Signal Processor.
8
Click on the Resources tab.
9
Make sure the check mark is removed in the Automatic
Settings check box.
Settings check box.
10
Select Basic Configuration 0005.
Make sure the list is as follows:
Chapter 6. Resolving System Resource Conflicts
91