Peavey tlm 2 Specification Guide
SPECS
P E A V E Y E L E C T R O N I C S
TLM
™
2
Low-Profile
Stage Monitor
Stage Monitor
SPECIFICATIONS
Enclosure:
TLM
™
2
Frequency Response:
75 Hz to 17 kHz
Low-Frequency Limit (-3 dB point):
75 Hz
Usable Low-Frequency Limit
(-10 dB point):
(-10 dB point):
55 Hz
Power Handling:
300 watts program
600 watts peak
600 watts peak
Sound Pressure Level • 1 Watt at
1 Meter • Swept-Sine Input in
Anechoic Environment:
1 Meter • Swept-Sine Input in
Anechoic Environment:
96 dB
Maximum Sound Pressure Level:
116 dB
Transducer Complement:
One 14XT
™
titanium compression driver
loaded onto a CH
®
-3 horn
One 12" 12834 woofer
Box Tuning Frequency (Fbox):
90 Hz
Crossover Frequency:
2.2 kHz
Crossover Type:
Internal passive two-way
Crossover Slope:
12 dB/octave high and low pass
Impedance (Nominal):
8 ohms
Impedance (Minimum):
5.1 ohms
Input Connections:
Two 1/4" full-range connectors
Enclosure Materials and Finish:
Durable black carpet
Mounting:
SA-1
™
stand adaptor
Dimensions (H x W x D):
15-1/2" x 22-3/4" x 17-1/2"
(39.37 cm x 57.8 cm x 44.5 cm)
(39.37 cm x 57.8 cm x 44.5 cm)
Net Weight:
46 lbs. (20.8 kg)
Shipping Weight:
53 lbs. (24 kg)
DESCRIPTION
The TLM
™
2 is a full-range, low-profile
stage monitor designed to ensure the
performer the most accurate
representation of sound. This monitor is
at the leading edge of technology, with
the high frequencies supplied by a
14XT
performer the most accurate
representation of sound. This monitor is
at the leading edge of technology, with
the high frequencies supplied by a
14XT
™
titanium-diaphragm compression
driver. The internal, full-range
crossover, blends the 12-inch woofer
with the 14XT
crossover, blends the 12-inch woofer
with the 14XT
™
for the optimum monitor
response.
The enclosure can be vertically mounted
on its stand adaptor or placed on-stage at
either 30 or 45 degrees. The SA-1
on its stand adaptor or placed on-stage at
either 30 or 45 degrees. The SA-1
™
stand
adaptor allows for the use of a speaker
stand to elevate the enclosure.
stand to elevate the enclosure.
The TLM
™
2 is covered with a durable
black carpet, and a metal grille is added
for speaker protection.
for speaker protection.
ARCHITECTURAL
& ENGINEERING
SPECIFICATIONS
& ENGINEERING
SPECIFICATIONS
The loudspeaker system shall have an
operating bandwidth of 75 Hz to
17 kHz. The output level shall be 96 dB
when measured at a distance of one
meter with an input of one watt. The
nominal impedance shall be 8 ohms.
The program power handling shall be
300 watts with maximum peak of
600 watts and minimum amplifier
headroom of 3 dB. The outside
dimensions shall be 15-1/2 inches high
by 22-3/4 inches wide by 17-1/2 inches
deep. The weight shall be 46 lbs. The
loudspeaker system shall be a Peavey
model TLM
operating bandwidth of 75 Hz to
17 kHz. The output level shall be 96 dB
when measured at a distance of one
meter with an input of one watt. The
nominal impedance shall be 8 ohms.
The program power handling shall be
300 watts with maximum peak of
600 watts and minimum amplifier
headroom of 3 dB. The outside
dimensions shall be 15-1/2 inches high
by 22-3/4 inches wide by 17-1/2 inches
deep. The weight shall be 46 lbs. The
loudspeaker system shall be a Peavey
model TLM
™
2.
®