Acer 2400 User Guide

24

English

Make sure that the printer cable is connected securely to the computer's 
parallel port or a USB port and the corresponding port on the printer.

I want to set up my location to use the internal modem.

To properly use your communication software (e.g. HyperTerminal), you need 
to set up your location:

1

Click on Start, Settings, Control Panel.

2

Double-click on Modems.

3

Click on Dialing Properties and begin setting up your location.

Refer to the Windows manual.

Note: Please note, on first booting your notebook, that you can 
skip the Internet Connection setup, as it is not necessary to 
complete the installation of your Operating System. After the 
Operating System is set up, you can proceed with the Internet 
Connection setup.

I want to restore my computer to its original settings without 
recovery CDs.

Note: If your system is the multilingual version, the operating 
system and language you choose when you first turn on the 
system will be the only option for future recovery operations.

This recovery process helps you restore the C: drive with the original software 
content that is installed when you purchase

 

your notebook. Follow the steps 

below to rebuild your C: drive.

 

(Your C: drive will be reformatted and all data 

will be erased.) It is important to back up all data files before using this option.

Before performing a restore operation, please check the BIOS settings.

1

Check to see if Acer disk-to-disk recovery is enabled or not.

2

Make sure the D2D Recovery setting in Main is Enabled.

3

Exit the BIOS setup utility and save changes. The system will reboot.

Note: To activate the BIOS setup utility, press <F2> during POST.