SimpleTech fv-u35 Software Guide

 

The Drives button on the left side of the StorageSync window lets you specify these drives. 
When you click this button, the Drive Manager screen appears (see Figure 31). This screen 
shows the source and target drives that are available, as well as their drive information. If you 
have more than one drive, click the drive to view its information in the Drive Information 
areas at the bottom of the screen. 

 

Initially, all available drives appear below Source Drives. You select at least one of these 
source drives to be a target drive by clicking the drive under Source Drives, then clicking the 
right arrow to move the drive below Target Media Drives (see Figure 32). If you have more 
than one target drive, you can specify more than one target drive. To remove a target drive, 
click the drive under Target Media Drives and click the left arrow to move the drive back 
under Source Drives. There must always be at least one source drive and one target media 
drive to restore files. 

!

 

The source and target drives you select remain in effect for all other tasks (for 
example, backup and restore) until you change the source and target drives.