Lexmark Prospect Pro205 User Manual
•
If the printer is connected to a Digital Subscriber Line, install a DSL filter for the printer. A DSL filter minimizes
interference between the fax signals and Internet signals on the line. Connect the printer to the phone port on
the DSL filter, and connect the computer to the DSL/HPN port on the filter.
interference between the fax signals and Internet signals on the line. Connect the printer to the phone port on
the DSL filter, and connect the computer to the DSL/HPN port on the filter.
To make sure that you connected the printer to the filter correctly, plug an analog phone into the
port on the
back of the printer, and then listen for a dial tone.
•
If the printer is connected to a VoIP line, then make sure that the printer is plugged into an active phone port.
Plug the printer into the first port on the VoIP adapter, most often labeled as Phone Port or Phone Line 1.
Plug the printer into the first port on the VoIP adapter, most often labeled as Phone Port or Phone Line 1.
To make sure that the phone port is active, plug an analog phone into the port, and then listen for a dial tone.
•
If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter. To make
sure that you are using the correct splitter, plug an analog phone into the splitter, and then listen for a dial tone.
sure that you are using the correct splitter, plug an analog phone into the splitter, and then listen for a dial tone.
•
If you have checked the items on this list but still do not hear a dial tone, then contact your line provider.
Cannot send faxes
If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
M
AKE
SURE
THAT
YOU
HAVE
REGISTERED
YOUR
USER
INFORMATION
IN
THE
PRINTER
If you did not enter your user information during initial setup, then enter your fax name and fax number. In some
countries, you cannot send a fax without entering your fax name or company name. Some fax machines also block
unknown faxes or faxes without sender information.
countries, you cannot send a fax without entering your fax name or company name. Some fax machines also block
unknown faxes or faxes without sender information.
D
ECREASE
THE
TRANSMISSION
SPEED
OF
THE
FAX
MODEM
The modem of the printer can transmit data at 33,600 bps. This is the maximum speed at which the printer can
send and receive faxes. It is not necessary, however, to set the modem to its fastest transmission capability. The
speed of the modem of the receiving fax machine must match or be greater than the speed at which you are
sending your fax. Otherwise, your fax will not be received.
send and receive faxes. It is not necessary, however, to set the modem to its fastest transmission capability. The
speed of the modem of the receiving fax machine must match or be greater than the speed at which you are
sending your fax. Otherwise, your fax will not be received.
To decrease the transmission speed of the modem:
1
From the printer control panel, press
.
2
Press the arrow buttons to scroll to Fax Setup, and then press
.
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
.
4
Press the arrow buttons to scroll to Max Send Speed, and then press
.
5
Select a sending speed, and then press
.
S
ET
THE
PRINTER
TO
SCAN
THE
ORIGINAL
DOCUMENT
BEFORE
DIALING
THE
NUMBER
The printer does not automatically redial if you set it to scan the original document after dialing the number.
Set the printer to scan before dialing so that you do not have to scan the document again if the fax fails. The scanned
document is saved in the printer memory. The printer can then retrieve it and automatically redial the number.
document is saved in the printer memory. The printer can then retrieve it and automatically redial the number.
To set the printer to scan before dialing:
1
From the printer control panel, press
.
2
Press the arrow buttons to scroll to Fax Setup, and then press
.
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
.
Troubleshooting
129